Cisco IOS XE Intelligent Services User Manual

Configuring ISG Support for Prepaid Billing
How to Configure ISG Support for Prepaid Billing
10
What to Do Next
You may want to configure a method of activating the service policy map or service profile; for example,
control policies can be used to activate services. For more information about methods of service
activation, see the “Configuring ISG Subscriber Services” module.
Enabling ISG Prepaid Billing in Service Profile on the Remote AAA Server
Perform this task to enable ISG support for prepaid billing in a service profile that is configured on a
remote AAA server.
SUMMARY STEPS
1. Add the ISG Traffic Class attribute to the service profile.
2. Add the ISG Prepaid Billing VSA to the service profile.
DETAILED STEPS
Step 6
end
Example:
Router(config-control-policymap-class-traffic)#
end
Exits the current configuration mode and returns to
privileged EXEC mode.
Step 7
show subscriber session [detailed] [identifier
identifier | uid session-id | username name]
Example:
Router# show subscriber session detailed
(Optional) Displays ISG subscriber session information.
Command or Action Purpose
Command or Action Purpose
Step 1
Add the ISG Traffic Class attribute to the service
profile.
Cisco-AVpair = "ip:traffic-class=in
access-group [<acl_number> | name <acl_name>]
[priority <n>]"
or
Cisco-AVpair = "ip:traffic-class=out
access-group [<acl_number> | name <acl_name>]
[priority <n>]"
Specifies input and output traffic to which the service will
apply.
• Both an input and output traffic classifier can be added
to a service profile.
Step 2
Add the ISG Prepaid Billing VSA to the service
profile.
26,9,1 = "prepaid-config={<name-of-config> |
default"
Enables ISG support for prepaid billing and applies a
configuration that defines the prepaid billing parameters.

Cisco IOS XE Intelligent Services Specifications

General

Brand	Cisco
Model	IOS XE Intelligent Services
Category	Gateway
Language	English