Cisco IP DECT 6825 User Manual

Procedure
Step 1 While your handset is idle, enter the star code to block call waiting.
Step 2 To hear the tone again, enter the star code to enable call waiting.
Block and Unblock Outgoing Caller Information with a Star Code
You can stop your handset from sending your caller information. You may need to do this for privacy reasons.
Use the star code given to you by your administrator or service provider.
Procedure
Step 1 While your handset is idle, enter star code to block caller information.
Step 2 To allow the handset to send caller information, enter the star code to enable caller information.
Related Topics
Hide Your Caller ID When You Make a Call, on page 82
Block and Unblock Anonymous Calls with a Star Code
You can ensure that only calls with a proper caller ID ring on your handset with a star code.
Use the star code given to you by your administrator or service provider.
Procedure
Step 1 While your handset is idle, enter the star code to block anonymous calls.
Step 2 To allow calls to ring again, enter the star code to allow anonymous calls.
Turn Do Not Disturb On and Off with a Star Code
When you don't want to be disturbed by incoming calls, you can turn on do not disturb (DND). When your
handset is in DND state, the incoming call is sent to voicemail.
Use the star code given to you by your administrator or service provider.
To use this feature, your administrator must enable DND.
Procedure
Step 1 While your handset is idle, enter the do not disturb star code.
Cisco IP DECT 6800 Series User Guide
44
Calls
Block and Unblock Outgoing Caller Information with a Star Code

Cisco IP DECT 6825 Specifications

General

Brand	Cisco
Model	IP DECT 6825
Category	IP Phone
Language	English