Cisco IW3702 User Manual

DescriptionItem
Select from:
• 4x N(m)-R/A to N(m)-STR, LMR-400-DB , 5’ RF cable,
Cisco PID: CAB-L400-5-N-N
• 4 x N(m)-STR to N(m)-STR, LMR-400-DB , 5’ RF cable,
Cisco PID: CAB-L400-5-N-NS
• 4x N(m)-R/A to N(m)-STR, LMR-400-DB , 10’ RF cable,
Cisco PID: AIR-CAB010LL-N
•
4 x N(m)-R/A to N(m)-STR, LMR-400-DB, 20 ft. cables.
Cisco PID CAB-L400-20-N-N
•
4 x N(m)-R/A to N(m)-STR, LMR-600-DB, 30 ft. cables.
Cisco PID CAB-L600-30-N-N
• 4 x N(m)-STR to N(m)-STR, LMR-400-DB, 25’ RF cable
with petrochemical and oils resistance, Cisco PID
AIR-CAB025HZ-N
Outdoor Cable
Select from:
•
White model, Cisco PID AIR-ANT2547V-N=
•
Grey Model, Cisco PID AIR-ANT2547VG-N=
4 x Cisco Aironet dual-band omnidirectional antennas are
required. The antenna specifications are:
•
2400-2484MHz, 5150-5875MHz, dual-band, WiFi,
operating frequency range
•
4 dBi (2.4 GHz), 7 dBi (5 GHz) gain
•
11 in. (27.94 cm) stick antennas for indoor or outdoor
use with a type N(m) connector
•
IP67 rated, -40 to 185°F (-40°C to 85°C) operating
temperature range
To mast-mount the antenna, you must purchase a
mast-mount U-bolt bracket from a third party.
Note
Antenna
30

Cisco IW3702 Specifications

General

Model	IW3702
Category	Wireless Access Point
Wireless Standards	802.11a/b/g/n/ac
Frequency Bands	2.4 GHz and 5 GHz
Ingress Protection	IP67
Ethernet Ports	2 x 10/100/1000BASE-T
Power Source	PoE (802.3af)
Humidity	5% to 95% (non-condensing)
Security	802.1X
Mounting	Pole, wall