Cisco IW3702 User Manual

DescriptionItem
4 x DC pass, N(m)-N(f) lightning arrestors. Cisco PID
CGR-LA-NM-NF.
Adapters:
2 x AIR-ACC370-NF-NF per antenna, if using extension
cables.
Description:
In addition to lightning arrestors, select from these cables and
adapters:
1
No cables or adapters requried if 30” integrated antenna
cables are of sufficient length for your intended
deployment. Each of the AIR-ANT2413P2M-N and
AIR-ANT5114P2M-N antennas have 2 x 30” integrated
cables with N(m) connectors, which can be connected
directly to the IW3702 antenna port N(f) connectors.
2
If longer cable lengths are needed for deployment, choose
an appropriate number of AIR-ACC370-NF-NF adapters
and cables below.
N(f) to N(f) adapter is needed to connect the N(m)
port of the antenna with the N(m) port of the
extension cables.
Note
Adapter and/or Lightning Arrestor
45

Cisco IW3702 Specifications

General

Model	IW3702
Category	Wireless Access Point
Wireless Standards	802.11a/b/g/n/ac
Frequency Bands	2.4 GHz and 5 GHz
Ingress Protection	IP67
Ethernet Ports	2 x 10/100/1000BASE-T
Power Source	PoE (802.3af)
Humidity	5% to 95% (non-condensing)
Security	802.1X
Mounting	Pole, wall