Cisco ME 3400 - Page 128

2-102
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
ethernet lmi ce-vlan map
Examples This example shows how to configure an E-LMI customer VLAN-to-EVC map to map EVC test to
customer VLAN 101 in service instance 333 on the interface:
Switch(config-if)# service instance 333 ethernet test
Switch(config-if-srv)# ethernet lmi ce-vlan map 101
Related Commands Command Description
service instance id
ethernet
Defines an Ethernet service instance and enters Ethernet service
configuration mode.
show ethernet service
instance
Displays information about configured Ethernet service instances.