Cisco ME 3400 - Show Platform Qos

C-35
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands
show platform qos
show platform qos
Use the show platform qos privileged EXEC command to display platform-dependent quality of service
(QoS) information.
show platform qos debug [aggregate-policer aggregate-policer-name | global-config |
input-queue | [interface [interface-id] [buffers | policers | queuing]] | label-table
[dynamic-label {dscp value cos value | label-number value | policy-map policy-map-name
class-map class-map-name} [asic number] | policer {parameter-table | qos-table|
selection-table} [asic number] | policy-map policy-map-name [asic number] | port-class [asic
number] | port-config port-number [asic number] | port-info port-number [asic number] |
table-map | vlan
vlan-id] [ | {begin | exclude | include} expression]
show platform qos statistics [interface [interface-id]] [ | {begin | exclude | include} expression]
Syntax Description debug Display QoS debug messages for the switch or for the
specified keyword.
aggregate-policer
aggregate-policer-name
(Optional) Display QoS aggregate policer information for the
specified aggregate policer.
global-config (Optional) Display QoS global configuration information.
input-queue (Optional) Display QoS input queue information.
interface [interface-id] [buffers |
policers | queuing]
(Optional) Display QoS information for all interfaces or the
specified interface. The keywords have these meanings:
• buffers—(Optional) Display information about QoS
buffers.
• policers—(Optional) Display information about QoS
policers.
• queuing—(Optional) Display information about QoS
output queues.
label-table [dynamic-label {dscp
value cos value | label-number value
| policy-map policy-map-name
class-map class-map-name} [asic
number]
(Optional) Display Qos label table information. The keywords
have these meanings:
• dynamic-label—(Optional) Display dynamic label
information.
• dscp value cos value—Display information based on
Differentiated Services Code Point (DSCP) value (0 to 63)
and class of service (CoS) value (0 to 7).
• label-number value—Display information based on the
dynamic label number. The range is from 158 to 255.
• policy-map policy-map-name class-map
class-map-name—Display information for the specified
policy map and class map.
• asic number—(Optional) Display information based on
the port ASIC number. The number is always 0.