Cisco ME 3400 - Show Table-Map

2-521
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show table-map
show table-map
Use the show table-map user EXEC command to display quality of service (QoS) table-map
information about all configured table maps or the specified table map.
show table-map [table-map-name] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show table-map command:
Switch> show table-map
tandoori_1>show table-map
Table Map abc
default copy
Table Map cos2dscp
from 2 to 16
default copy
Table Map cos2cos
from 2 to 5
from 3 to 6
default 7
Table Map cos2cos10
default copy
Table Map cos=cos
default copy
table-map-name (Optional) The name of the table map.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)EX This command was introduced.