2-495
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show policer cpu uni-eni
show policer cpu uni-eni
Use the show policer cpu uni-eni user EXEC command to display control-plane policer information for
the user network interfaces (UNIs) and enhanced network interfaces (ENIs) on the switch, including
frames dropped or the configured threshold rate for the control-plane security feature on the switch.
show policer cpu uni-eni {drop [interface interface-id]] | rate} [ | {begin | exclude | include}
expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines This command displays policer information that applies to UNIs and ENIs on the switch. Rate-limiting
and policers are the same on both port types, except on ENIs on which a Layer 2 control protocol (CDP,
STP, LLDP, LACP, or PAgP) has been enabled.
The output also displays if CPU protection has been disabled.
The show policer cpu uni-eni drop privileged EXEC command displays the number of accepted and
dropped frames for all interfaces on the switch or for the specified interface.
The show policer cpu uni-eni rate command displays the CPU protection rate-limit threshold on the
switch that was configured by entering the policer cpu uni rate global configuration command or the
default rate of 16000 bits per second (bps).
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
drop (Optional) Display control-plane frame-drop count for all interfaces or the
specified interface.
interface
interface-id
Optional) Display the control-plane information for the specified physical
interface.
rate (Optional) Display the configured threshold rate for CPU policers.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)EX This command was introduced.
12.2(25)SEG1 Outputs for the show policer cup uni drop changed.
12.2(44)SE The show policer cpu uni command was changed to the show policer cpu
uni-eni command.
To Next Page
Loading...
Need help?
General
