Cisco ME 3400 - Page 218

2-192
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
ipv6 traffic-filter
Examples This example filters inbound IPv6 traffic on an IPv6-configured interface as defined by the access list
named cisco:
Switch (config)# interface gigabitethernet0/1
Switch(config-if)# no switchport
Switch(config-if)# ipv6 address 2001::/64 eui-64
Switch(config-if)# ipv6 traffic-filter cisco in
Related Commands Command Description
ipv6 access-list Defines an IPv6 access list and sets deny or permit conditions for the
defined access list.
show ipv6 access-list Displays the contents of all current IPv6 access lists.
show ipv6 interface Displays the usability status of interfaces configured for IPv6.