Cisco ME 3400 - Page 424

2-398
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show idprom
Embedded PHY : not present
SFP presence index : 0
SFP iter cnt : 697918
SFP failed oper flag : 0x0
IIC error cnt : 0
IIC error dsb cnt : 0
IIC max sts cnt : 4
Chk for link status : 1
Link Status : 1
Link Status Media : 1
Preferred media : 0
Resolved Media : 1
Config Media : 1
Access Count : 0
Access Count Max : 2
Port Rx Loss : no
Port Tx Fault : no
Port Tx Disable : no
Sfp selection asic reg map
--------------------------------
stbi : 0x00
sfpControl : 0x4C
Regs Loc : 0xF0000000
-------------------------------------------------------
Page 0 Registers
------------------------------------------------------------------------
0000: 1140 Control Register : 0001 0001 0100 0000
0001: 6149 Control STATUS : 0110 0001 0100 1001
0002: 0141 Phy ID 1 : 0000 0001 0100 0001
0003: 0C92 Phy ID 2 : 0000 1100 1001 0010
0004: 01E1 Auto-Negotiation Advertisement : 0000 0001 1110 0001
0005: 0000 Auto-Negotiation Link Partner : 0000 0000 0000 0000
0006: 0004 Auto-Negotiation Expansion Reg : 0000 0000 0000 0100
0007: 2001 Next Page Transmit Register : 0010 0000 0000 0001
0008: 0000 Link Partner Next page Registe : 0000 0000 0000 0000
0009: 0F00 1000BASE-T Control Register : 0000 1111 0000 0000
000A: 0000 1000BASE-T Status Register : 0000 0000 0000 0000
000F: 0000 Extended Status Register : 0000 0000 0000 0000
0010: 6028 PHY Specific Control Register : 0110 0000 0010 1000
0011: 6CC8 PHY Specific Status Register : 0110 1100 1100 1000
0012: 0000 Interrupt Enable Register : 0000 0000 0000 0000
0013: 0700 PHY Specific Status Register2 : 0000 0111 0000 0000
0015: 01C0 Receive Error Counter : 0000 0001 1100 0000
0016: 0000 Page Address Register : 0000 0000 0000 0000
001A: 8040 PHY Specific Control Register2 : 1000 0000 0100 0000
<output truncated>
Related Commands
Command Description
show controllers
ethernet-controller
Displays per-interface send and receive statistics read from the
hardware, interface internal registers, or port ASIC information.