Cisco ME 3400 - Page 439

2-413
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show interfaces transceivers
This is an example of output from the show interfaces transceiver threshold-table command:
Optical Tx Optical Rx Temp Laser Bias Voltage
current
------------- ------------- ------ ------------ ---------
DWDM GBIC
Min1 -0.50 -28.50 0 N/A 4.50
Min2 -0.30 -28.29 5 N/A 4.75
Max2 3.29 -6.69 60 N/A 5.25
Max1 3.50 6.00 70 N/A 5.50
DWDM SFP
Min1 -0.50 -28.50 0 N/A 3.00
Min2 -0.30 -28.29 5 N/A 3.09
Max2 4.30 -9.50 60 N/A 3.59
Max1 4.50 9.30 70 N/A 3.70
RX only WDM GBIC
Min1 N/A -28.50 0 N/A 4.50
Min2 N/A -28.29 5 N/A 4.75
Max2 N/A -6.69 60 N/A 5.25
Max1 N/A 6.00 70 N/A 5.50
DWDM XENPAK
Min1 -1.50 -24.50 0 N/A N/A
Min2 -1.29 -24.29 5 N/A N/A
Max2 3.29 -6.69 60 N/A N/A
Max1 3.50 4.00 70 N/A N/A
DWDM X2
Min1 -1.50 -24.50 0 N/A N/A
Min2 -1.29 -24.29 5 N/A N/A
Max2 3.29 -6.69 60 N/A N/A
Max1 3.50 4.00 70 N/A N/A
DWDM XFP
Min1 -1.50 -24.50 0 N/A N/A
Min2 -1.29 -24.29 5 N/A N/A
Max2 3.29 -6.69 60 N/A N/A
Max1 3.50 4.00 70 N/A N/A
CWDM X2
Min1 N/A N/A 0 N/A N/A
Min2 N/A N/A 0 N/A N/A
Max2 N/A N/A 0 N/A N/A
Max1 N/A N/A 0 N/A N/A
Related Commands Command Description
show interfaces Displays additional interface characteristics.