Cisco ME 3400 Command Reference Guide

Contents
v
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
dot1x system-auth-control 2-83
dot1x test eapol-capable 2-84
dot1x test timeout 2-85
dot1x timeout 2-86
dot1x violation-mode 2-88
duplex 2-89
errdisable detect cause 2-91
errdisable detect cause small-frame 2-93
errdisable recovery 2-95
errdisable recovery cause small-frame 2-97
ethernet evc 2-98
ethernet lmi 2-99
ethernet lmi ce-vlan map 2-101
ethernet oam remote-failure 2-103
ethernet uni 2-105
ethernet uni id 2-107
exceed-action 2-108
flowcontrol 2-110
interface port-channel 2-112
interface range 2-114
interface vlan 2-116
ip access-group 2-118
ip address 2-121
ip arp inspection filter vlan 2-123
ip arp inspection limit 2-125
ip arp inspection log-buffer 2-127
ip arp inspection trust 2-129
ip arp inspection validate 2-131
ip arp inspection vlan 2-133
ip arp inspection vlan logging 2-134
ip dhcp snooping 2-136
ip dhcp snooping binding 2-137
ip dhcp snooping database 2-139
ip dhcp snooping information option 2-141
ip dhcp snooping information option allowed-untrusted 2-143

Cisco ME 3400 Specifications

General

Category	Switch
Rack Mountable	Yes
Jumbo Frame Support	Yes
Authentication Method	RADIUS, TACACS+
RAM	128 MB
Flash Memory	32 MB
Power Device	Internal power supply
Model	ME 3400
Layer	Layer 2
MAC Address Table Size	8000 entries
Remote Management Protocol	SNMP, Telnet, SSH, HTTP, HTTPS
Features	VLAN support, IGMP snooping, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x
Memory	128 MB
Power Supply	AC 120/230 V (50/60 Hz)
Dimensions (H x W x D)	4.4 cm x 44.5 cm x 24.2 cm
Routing Protocol	Static routing