Cisco ME 3400 - Page 526

2-500
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show policy-map
Queue Limit
queue-limit 250 (packets)
queue-limit precedence 1 100 (packets)
Output Queue:
Max Tail Drop Threshold: 250
Tail Packets Drop: 4393
Class-map: ip2 (match-all)
0 packets
Match: ip precedence 2
Traffic Shaping
Average Rate Traffic Shaping
CIR 5% 555555 (bps)
Output Queue:
Max Tail Drop Threshold: 48
Tail Packets Drop: 0
Class-map: ip3 (match-all)
0 packets
Match: ip precedence 3
Bandwidth percent 10 1111110 (bps)
Queue Limit
queue-limit 200 (packets)
queue-limit precedence 3 100 (packets)
Output Queue:
Max Tail Drop Threshold: 200
Tail Packets Drop: 0
Class-map: class-default (match-any)
200562 packets
Match: any
56 packets
Output Queue:
Tail Packets Drop: 191028
This is an example of output from the show policy-map interface command for an interface with an
input policy applied:
Switch> show policy-map interface gigabitethernet0/1
GigabitEthernet0/1
Service-policy input: pin-police
Class-map: ip1 (match-all)
0 packets
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 1
police cir 20000000 bc 625000
conform-action transmit
exceed-action drop
conform: 27927 (packets) exceed: 272073 (packets)
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
0 packets
5 minute rate 0 bps