Cisco ME 3400 - Page 682

2-656
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
uni-vlan
To change a UNI-ENI isolated VLAN to an RSPAN VLAN or a private VLAN, enter the rspan-vlan or
private-vlan VLAN configuration command. This overwrites the default isolated VLAN configuration.
To change a UNI-ENI community VLAN to an RSPAN VLAN or a private VLAN, you must first enter
the no uni-vlan VLAN configuration command to return to the default UNI-ENI isolated VLAN
configuration before entering the rspan-vlan or private-vlan VLAN configuration command.
Note For more information about UNI-ENI VLANs and interaction with other features, see the software
configuration guide for this release.
Examples This example show s how to change VLAN 20 from the default UNI-ENI isolated VLAN to a UNI-ENI
community VLAN:
Switch# configure terminal
Switch(config)# vlan 20
Switch(config-vlan)# uni-vlan community
Switch(config-vlan)# exit
You can verify your setting by entering the show vlan uni-vlan or show vlan vlan-id uni-vlan [type]
privileged EXEC command.
Related Commands Command Description
show interfaces status Displays the status of interfaces, including the VLANs to which they
belong.
show vlan uni-vlan Displays the UNI-ENI VLANs on the switch.