Cisco ME 3400 - Page 847

C-45
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands
show platform tcam
Note Though visible in the command-line help strings, the ipv6, multicast-expansion and usage keywords
are not supported.
Command Modes Privileged EXEC
Command History
table {acl | all | equal-cost-route
| ipv6 {acl | qos | secondary}
local | mac-address | qos |
secondary | station | vlan-list}
Display lookup and forwarding table information. The keywords
have these meanings:
• acl—Display the access-control list (ACL) table.
• all—Display all the TCAM tables.
• equal-cost-route—Display the equal-cost-route table.
• local—Display the local table.
• mac-address—Display the MAC-address table.
• qos—Display the QoS table.
• secondary—Display the secondary table.
• station—Display the station table.
• vlan-list—Display the VLAN list table.
usage Display the CAM and forwarding table usage.
[[asic number [detail [invalid]] |
[index number [detail [invalid]] |
invalid | num number [detail
[invalid]] | invalid] | [invalid] |
[num number [detail [invalid]] |
invalid]]
Display information. The keywords have these meanings:
• asic number—Display information for the specified ASIC
device ID. The range is 0 to 15.
• detail [invalid]—(Optional) Display valid or invalid details.
• index number—(Optional) Display information for the
specified TCAM table index. The range is 0 to 32768.
• num number—(Optional) Display information for the
specified TCAM table number. The range is 0 to 32768.
| begin (Optional) Display begins with the line that matches the
expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified
expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)EX This command was introduced.