Cisco ME 3800X Installation Guide

CHAPTER
1-1
Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide
OL-22168-01
1
Product Overview
The Cisco Metro Ethernet (ME) 3600X switch is an Ethernet access switch.
The Cisco ME 3800X switch is a carrier Ethernet aggregation switch.
Throughout this document, the Cisco ME 3800X and ME 3600X are referred to as the switch.
• Setting Up the Switch, page 1-1
• Switch Models, page 1-1
• Front Panel, page 1-2
• Rear Panel, page 1-10
• Power Supply Module Features, page 1-11
• Fan Module, page 1-12
• Management Options, page 1-13
Setting Up the Switch
See the Cisco ME 3800X and ME 3600X Switch Getting Started Guide on Cisco.com for instructions on
how to initially configure your switch. The getting started guide also covers switch management options,
basic rack-mounting procedures, port and module connections, power connection procedures, and
troubleshooting.
For instructions on setting up your switch using the CLI, see Appendix C, “Configuring the Switch with
the CLI-Based Setup Program.”
Switch Models
You can deploy the switch as a backbone switch, aggregating 10BASE-T, 100BASE-TX, 1000BASE-T,
and fiber-optic Ethernet traffic from other network devices.
See the switch software configuration guide for examples that show how you might deploy the switch in
your network.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English