Cisco Meraki MR Series User Manual

MX Series with Wireless
The Local Status Page tabs and navigation instructions are the same as for their non-wireless MX model version presented above. In addition, the Connection
tab provides information similar to an MR device's LSP.
MX Series with Integrated Cellular
The Local Status Page tabs and navigation instructions are the same as for their non-cellular MX model version presented above. Furthermore, the tabs can
display information similar to what's described below for an MG device's LSP.
MG Series
MG21
MG21 cellular gateway provides the following information and configuration options on their local status page:
• Connection
Provides information regarding the client's connectivity to the MG cellular gateway, including the current cellular network status, cloud connectivity, and
signal information.
Note: Navigating to http://wired.meraki.com or http://mx.meraki.com when directly connected to a LAN port on a spare MX security appliance in active
MX warm spare deployments will present the local status page of the primary MX appliance. The spare must be disconnected from the LAN in order
to access its local status page. This does not apply to MX security appliance models with a dedicated management port, as their local status page
can be accessed directly using that port.
Note: The speed test functionality on the local status page is deprecated on all MG cellular gateway devices starting with MG 3.1+ firmware.
19

Cisco Meraki MR Series Specifications

General

Brand	Cisco
Model	Meraki MR Series
Category	Switch
Language	English