Cisco Meraki MR Series

• Switch port status
Provides information regarding the configuration and status of ports on this switch.
Additionally, the packet capture function found on the local status page has a default filter that is specific to Meraki Cloud Connectivity requirements
and will not capture or display anything outside of that filter. This filter is not configurable.
This filter is set to capture the following traffic patterns to/from the switch MAC which were determined to be critical to Meraki Cloud connectivity:
• ARP,
• DHCP (UDP 67/68)
• DNS (TCP/UDP 53)
• ICMP (type 0, 3 and 8)
• UDP 7351
• HTTPS (TCP 443)
• LLDP
8