Cisco NCS 5700 Series User Manual

4. To remove the MPA from the chassis, use a number 2 Phillips screwdriver to loosen the captive screws
on the MPA. Ensure that you first loosen the right screw and then the left.
5. Grasp the MPA and pull the MPA from the chassis. (You have already disconnected the cables from the
MPA.)
Hardware Installation Guide for Cisco NCS 5700 Series Fixed-Port Routers
98
Replace Chassis Components
Modular Port Adapter Installation and Removal

Cisco NCS 5700 Series Specifications

General

Brand	Cisco
Model	NCS 5700 Series
Category	Network Router
Language	English