Table 19: Power Supply LED Descriptions
StatusColorLED
Power supply is on and transmitting power to the router.GreenSTATUS
Power supply is connected to input power source but not transmitting
power to the router.
Blinking
Green
Power supply failure, due to one of the following conditions:
• Over Voltage
• Over Current
• Over Temperature
• Fan Failure
Amber
Power supply is operating but a warning condition has occurred, due to
one of the following conditions:
• High temperature
• High power
• Slow fan
Blinking
Amber
Power supply units are not receiving power.Off
Hardware Installation Guide for Cisco NCS 5700 Series Fixed-Port Routers
110
LEDs
Power Supply LED
To Next Page
Loading...
