Cisco Nexus 5600 Series - Power Supply

1-2
Cisco Nexus 5600 Series Hardware Installation Guide
Chapter 1 Overview
Cisco Nexus 5672UP-16G
The Cisco Nexus 5672UP-16G switch has the following features:
• 48 fixed ports of which up to 24 ports can be unified ports (UP) and the rest are 1/10 Gbps Ethernet
ports
• The 24 unified ports provide 16/8/4 Gbps Fibre Channel as well as 10 Gigabit Ethernet and FCoE
connectivity options.
• 6 ports of 40 Gbps using QSFP+ transceivers for Ethernet.
• Two bays on the switch for hot swap-capable power supplies, which provide port side intake or
exhaust for cooling.
• Three bays on the switch for hot swap-capable fan modules.
• A management and console interface on the front of the switch.
Figure 1-1 Cisco Nexus 5672UP-16G Switch
Power Supply
The Cisco Nexus 5672UP-16G switch uses a front-end power supply. The chassis has slots for two
redundant power supplies. Power Supply options need to be configured with the base chassis. It needs a
minimum of one power supply to operate. Online Insert and Removal (OIR) is supported on the power
supplies and the power supplies are hot swappable. The Cisco Nexus 5672UP-16G supports port-side
exhaust and port-side intake. Table 1-15 lists the power supplies that you can order with a Cisco Nexus
5672UP-16G switch.
Table 1-1 Power Supplies for the Cisco Nexus 5672UP-16Gswitch
Part Number Power Supply
NXA-PAC-1100W Cisco Nexus 5500/6000 Platinum PSU port side exhaust airflow module,
A/C, 100-240V, 1100W
NXA-PAC-1100W(=) Cisco Nexus 5500/6000 Platinum PSU port side exhaust airflow module
spare, A/C, 100-240V, 1100W
NXA-PAC-1100W-B Cisco Nexus 5500/6000 Platinum PSU port side intake airflow module,
A/C, 100-240V, 1100W
NXA-PAC-1100W-B(=) Cisco Nexus 5500/6000 Platinum PSU port side intake airflow module
spare, A/C, 100-240V, 1100W