Cisco Nexus 5600 Series - Page 44

2-6
Cisco Nexus 5600 Series Hardware Installation Guide
Chapter 2 Installing the Cisco Nexus 5600 Series Switches
Installing a Cisco Nexus 5600 Series Switch
Note You must supply the 24 screws required to mount the rack brackets and slider rails to the rack. The
rack-mount kit does not provide these screws.
Table 2-2 Cisco Nexus 5672UP and 5672UP-16G switch Rack-Mount Kit
Quantity Part Description
2 Rack-mount guides
2 Rack-mount brackets
2 Rack-mount sliders
16 M4 x 0.7 x 8mm Phillips flat-head screws
Table 2-3 Cisco Nexus 56128P switch Rack-Mount Kit
Quantity Part Description
2 Rack-mount brackets
16 M4 x 0.7 x 8mm Phillips countersunk screws
2 Rack-mount guides
2 Rack-mount slider rails
(22 inch minimum to a 36 inch maximum)
Table 2-4 Cisco Nexus 5624Q switch Rack-Mount Kit
Quantity Part Description
2 Rack-mount brackets
16 M4 x 0.7 x 8mm Phillips flat-head screws
2 Rack-mount guides
2 Rack-mount sliders
Table 2-5 Cisco Nexus 5648Q switch Rack-Mount Kit
Quantity Part Description
2 Rack-mount brackets
16 M4x0.7 x 8mm Phillips countersunk screws
2 Rack-mount guides
2 Rack-mount sliders