Cisco Nexus 9300-FX

CHAPTER 1
Overview
• Overview, on page 1
Overview
The Cisco Nexus 9348GC-FXP switch (N9K-C9348GC-FXP) is a 1-RU fixed-port, L2/L3 switch, designed
for ACI deployments. This switch has 48 100/1000-Megabit 1GBASE-T host ports, 4 10-/25-Gigabit SFP28
host ports, and 2 40-/100-Gigabit QSFP28 uplink ports. The chassis for this switch includes the following
user-replaceable components:
• Fan modules (three) with the following airflow choices:
• Port-side intake airflow with burgundy coloring (NXA-FAN-30CFM-B)
• Port-side exhaust airflow with blue coloring (NXA-FAN-30CFM-F)
• Power supply modules (two—one for operations and one for redundancy [1+1]) with the following
choices (do not mix AC and DC power sources and do not mix airflow directions):
• 350-W AC power supply with port-side intake airflow (burgundy coloring) (NXA-PAC-350W-PI)
• 350-W AC power supply with port-side exhaust airflow (blue coloring) (NXA-PAC-350W-PE)
• 440-W DC power supply with port-side exhaust airflow (burgundy coloring) (NXA-PDC-440W-PI)
• 440-W DC power supply with port-side exhaust airflow (blue coloring) (NXA-PDC-440W-PE)
The following figure shows the hardware features seen from the port side of the chassis.
Cisco Nexus 9348GC-FXP ACI Mode Hardware Installation Guide
1