Cisco Nexus 93108TC-FX - Page 12

Screw holes (6) for attaching rack mounting
brackets
4Beacon [BCN], Status [STS], and Environment
[ENV] LEDs
1
Grounding pad548 10/1-Gigabit RJ45 ports2
6 40/100-Gigabit QSFP28 ports3
To determine which transceivers, adapters, and cables are supported by this switch, see the Cisco Transceiver
Modules Compatibility Information document.
The following figure shows the hardware features seen from the power supply side of the chassis.
Management port (SFP+ port)6Two power supplies (one used for operations and
one used for redundancy) (AC power supplies
shown) with power supply slot 1 on the left and
slot 2 on the right
1
USB port7Four fan modules with fan slot 1 on the left and
fan slot 4 on the right
2
Screw holes (6) for attaching rack mounting
brackets
8Console port (RS232 port)3
Grounding pad9Management port (RJ-45 port)4
Chassis LEDs (Beacon [BCN] and Status [STS])5
Cisco Nexus 93108TC-FX ACI Mode Hardware Installation Guide
2
Overview
Overview