CHAPTER 4
Connecting the Switch to the ACI Fabric
•
ACI Fabric Topology, page 25
•
Preparing to Connect to Other Devices, page 26
•
Connecting Leaf Switches to APICs, page 27
•
Connecting Leaf Switches to Spine Switches, page 28
•
Setting Up an Optional Console Interface, page 31
•
Setting Up an Optional Management Connection, page 32
•
Maintaining Transceivers and Optical Cables, page 32
ACI Fabric Topology
The ACI fabric topology includes the following major components:
•
Application Centric Infrastructure Controller (APIC) appliance (cluster of APICs)
•
Leaf switches (Cisco Nexus 93108TC-EX, 93108TC-FX, 93120TX, 93128TX, 93180LC-EX,
93180YC-EX, 93180YC-FX, 9332PQ, 9348GC-FXP, 9372PX, 9372PX-E, 9372TX, 9372TX-E, 9396PX,
and 9396TX switches)
•
Spine switches (Cisco Nexus 9336PQ, 9364C, 9504, 9508, and 9516 switches)
As shown in the following figure, each APIC is connected to one or two leaf switches and each leaf switch
should be connected to every spine switch in the same fabric.
Cisco Nexus 93108TC-FX ACI Mode Hardware Installation Guide
25
To Next Page
Loading...
