Cisco Nexus 93108TC-FX - Preparing to Connect Other Devices

To prevent sub-optimal forwarding between endpoints, connect every leaf switch in the fabric to every
spine switch in the same fabric.
Note
Figure 1: Connections Between APIC Clusters, Leaf Nodes, and Spine Nodes
Preparing to Connect to Other Devices
When preparing to connect the fabric devices, consider the following for each type of interface, and gather
all of the required equipment before making the connections:
•
Cabling type required for each interface type
•
Distance limitations for each signal type
•
Additional interface equipment required
Cisco Nexus 93108TC-FX ACI Mode Hardware Installation Guide
26
Connecting the Switch to the ACI Fabric
Preparing to Connect to Other Devices