Cisco Nexus 93108TC-FX - Contact and Site Information Recording; Chassis and Module Information Recording

DC Power Cable Specifications
Cord Set DescriptionPower CordPower Supply
8 AWG insulated cable (10 AWG minimum) for each
power supply
(customer supplied)NXA-PDC-930W-PE
(port-side exhaust airflow)
NXA-PDC-930W-PI
(port-side intake airflow)
8-AWG cable with 3-pin keyed power supply connector
and three wires (power source connection)
CAB-48DC-40A-8AWGNXA-PDC-930W-PE
(port-side exhaust airflow)
NXA-PDC-930W-PI
(port-side intake airflow)
8-AWG cable with 3-pin keyed power supply connector
and three wires (power source connection)
CAB-48DC-40A-8AWGNXA-PDC-930W-PE
(port-side exhaust airflow)
NXA-PDC-930W-PI
(port-side intake airflow)
No power cord included with switchNO-POWER-CORDAll except Argentina,
Brazil, and Japan
Regulatory Standards Compliance Specifications
The following table lists the regulatory standards compliance for the switch.
Table 1: Regulatory Standards Compliance: Safety and EMC
DescriptionSpecification
Products should comply with CE Markings according to directives 2004/108/EC
and 2006/95/EC.
Regulatory compliance
•
UL 60950-1 Second Edition
•
CAN/CSA-C22.2 No. 60950-1 Second Edition
•
EN 60950-1 Second Edition
•
IEC 60950-1 Second Edition
•
AS/NZS 60950-1
•
GB4943
Safety
Cisco Nexus 93108TC-FX ACI Mode Hardware Installation Guide
51
System Specifications
DC Power Cable Specifications