Cisco Nexus 93180YC-FX3 - Page 4

Connecting the Switch to the ACI Fabric 29
CHAPTER 4
ACI Fabric Topology 29
Preparing to Connect to Other Devices 30
Connecting Leaf Switches to APICs 31
Connecting Leaf Switches to Spine Switches 33
Installing a Gigabit Ethernet module (GEM) 34
Virtual Port Channel Migration - Migration of Nodes from a First-Generation Switch to a
Second-Generation Switch 34
Setting Up an Optional Console Interface 35
Setting Up an Optional Management Connection 36
Optic Transceiver Removal Using the Optics Extraction Tool 36
Maintaining Transceivers and Optical Cables 37
Replacing Components 39
CHAPTER 5
Replacing a Power Supply Module 39
Replacing an AC Power Supply 39
Rack Specifications 41
APPENDIX A
Overview of Racks 41
General Requirements for Cabinets and Racks 41
Requirements Specific to Standard Open Racks 42
Requirements Specific to Perforated Cabinets 42
Cable Management Guidelines 42
System Specifications 43
APPENDIX B
Environmental Specifications 43
Switch Dimensions 44
Switch and Module Weights and Quantities 44
Transceiver and Cable Specifications 44
Switch Power Input Requirements 44
Power Specifications 45
650-W AC Power Supply Specifications 45
1200-W HVAC/HVDC Power Supply Specifications 45
Cisco Nexus 93180YC-FX3 ACI-Mode Switch Hardware Installation Guide
iv
Contents