Cisco Nexus 93180YC-FX3 - Replacing a Fan Module; System Specifications; Environmental Specifications; Switch Dimensions

Heat Dissipation
Requirement
Maximum Power
Consumption (AC or DC)
Typical Power
Consumption (AC or DC)
Switch
2047.285 BTUs per hour600 W375Cisco Nexus
93180YC-FX3
Power Specifications
Power specifications include the specifications for each type of power supply module.
650-W AC Power Supply Specifications
These specifications apply to the following power supplies:
• NXA-PAC-650W-PE
• NXA-PAC-650W-PI
SpecificationCharacteristic
Nominal range: 100 and 240 VAC (Range: 90-132
VAC, 180-264 VAC)
AC input voltage
Nominal range: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
7.6 A at 90 - 132 VAC
3.65 A at 180 - 264 VAC
Maximum AC input current
760 VA at 100 VACMaximum input volt-amperes
650 WMaximum output power per power supply
11 A (sub-cycle duration)Maximum inrush current
12 ms at 650 WMaximum hold-up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum
certified)
Efficiency rating
RSP1Form factor
1200-W HVAC/HVDC Power Supply Specifications
These specifications apply to the 1200-W HVAC/HVDC (N9K-PUV-1200W) power supplies.
Cisco Nexus 93180YC-FX3 ACI-Mode Switch Hardware Installation Guide
45
System Specifications
Power Specifications