• Power supply modules (two—One for operations and one for redundancy [1+1]) with the following
choices:
• 650-W port-side exhaust AC power supply with blue coloring (NXA-PAC-650W-PE)
• 650-W port-side intake AC power supply with burgundy coloring (NXA-PAC-650W-PI)
• 1200-W HVAC/HVDC power supply with dual-direction airflow white coloring (N9K-PUV-1200W)
• 930-W port-side exhaust DC power supply with blue coloring (NXA-PDC-930W-PE)
• 930-W port-side intake DC power supply with burgundy coloring (NXA-PDC-930W-PI)
All fan modules and power supplies must use the same airflow direction.
Note
This switch may present access issues if installed between switches with greater
chassis depth. Please consider this before installation.
Note
Deployment Scheme for SFP-10G-T-X Transceivers
The following figure shows the maximum configuration density of SFP-10G-T-X SFP+ transceivers for this
switch.
The following figure shows the switch features on the port side of the chassis.
48 100M/1/10/25-Gigabit
Ethernet SFP28 ports
41PPS and 10MHz SMB
ports
1
Cisco Nexus 93180YC-FX3 ACI-Mode Switch Hardware Installation Guide
2
Overview
Overview
To Next Page
Loading...
