Cisco Nexus 9332C - Switch and Module Weights and Quantities; Transceiver and Cable Specifications

Switch and Module Weights and Quantities
QuantityWeight per UnitComponent
125 lb (11.3 kg)Cisco Nexus 9332C Chassis
(N9K-C9332C)
5 (4 for operations and 1 for
redundancy)
—
0.26 lb (0.12 kg)
Fan Module
– Port-side exhaust (blue)
(NXA-FAN-35CFM-PE)
– Port-side intake (burgundy)
(NXA-FAN-35CFM-PI)
2 (1 for operations and 1 for
redundancy)
—
2.42 lb (1.1 kg)
Power Supply Module
– 1100-W AC port-side exhaust
(blue) (N9K-PAC-1100W-PE2)
– 1100-W AC port-side intake
(burgundy)
(N9K-PAC-1100W-PI2)
– 1100-W DC port-side exhaust
(blue) (NXA-PDC-1100W-PE)
– 1100-W DC port-side intake
(burgundy) (NXA-PDC-1100W-PI)
– 1100-W HVAC/HVDC port-side
exhaust (blue)
(NXA-PUV-1100W-PE)
– 1100-W HVAC/HVDC port-side
intake (burgundy)
(NXA-PUV-1100W-PI)
– 750-W AC port-side exhaust
(blue) (NXA-PAC-750W-PE)
– 750-W AC port-side intake
(burgundy) (NXA-PAC-750W-PI)
Transceiver and Cable Specifications
To determine which transceivers, adapters, and cables are supported by this switch, see https://www.cisco.com/
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see https://www.cisco.com/c/en/us/support/
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Cisco Nexus 9332C ACI-Mode Switch Hardware Installation Guide
48
System Specifications
Switch and Module Weights and Quantities