Cisco Nexus 9332C - Regulatory Standards Compliance Specifications

PhotoCord Set DescriptionPart Number
HVDC
6.6-foot (2.0 m) cable with
Saf-D-Grid and three terminal
connectors
CAB-HVDC-3T-2M
Not applicableAll except Argentina, Brazil, and
Japan
No power cord included with
switch
NO-POWER-CORD
Table 2: HVAC/HVDC Power Cables Callout Table
Connect this end to the power supply unit.1
DC Power Cable Specifications
PhotoDescriptionPart Number
The 1100W DC power supply
(NXA-PDC-1100W-PE/PI) is
shipped with a connector already
plugged into the power supply.
NXA-PDC-1100W-PE/PI
Regulatory Standards Compliance Specifications
The following table lists the regulatory standards compliance for the switch.
Cisco Nexus 9332C ACI-Mode Switch Hardware Installation Guide
53
System Specifications
DC Power Cable Specifications