Cisco Nexus 9332C - 1100-W DC Power Supply Specifications

SpecificationCharacteristic
Nominal range: 100 and 240 VAC (Range: 90-132
VAC, 180-264 VAC)
AC input voltage
Nominal range: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
12 A at 115 VAC
6 A at 240 VAC
Maximum AC input current
760 A at 100 VACMaximum input volt-amperes
1100 WMaximum output power per power supply
33 A (sub-cycle duration)Maximum inrush current
12 ms at 1100 WMaximum hold-up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum
certified)
Efficiency rating
RSP1Form factor
1100-W DC Power Supply Specifications
These specifications apply to the following power supplies:
• NXA-PDC-1100W-PE
• NXA-PDC-1100W-PI
SpecificationCharacteristic
Nominal range: -54VDC (Range: -40 to -72 VDC)DC input voltage range
32 A at -40 VDCMaximum DC input current
1100 WMaximum output power per power supply
90 A (cold turn on)Maximum inrush current
4 ms at 100% loadMaximum hold-up time
12 V/ 90APower supply output voltage
3.3 V/ 3APower supply standby voltage
94% at 50% loadEfficiency rating @ -48VDC
Cisco Nexus 9332C ACI-Mode Switch Hardware Installation Guide
50
System Specifications
1100-W DC Power Supply Specifications