Both power supplies should use the same type of power source. Do not mix AC
and DC power sources.
Note
All fan modules and power supplies must use the same airflow direction during
operations.
Note
The following figure shows the hardware features seen from the port side of the chassis.
Figure 1: Port Side View of the Cisco Nexus 9336C-FX2 Switch
36 ports that can be
configured differently for
uplink and downlink
connections
4Chassis LEDs (Beacon [BCN], Status [STS], and Environment
[ENV])
1
Screw holes (6) for attaching
rack mounting brackets.
5Lane selector LEDs2
Screw holes (2) for attaching
grounding lug.
6Lane selection button3
The following figure shows the hardware features seen from the power supply side of the chassis.
Figure 2: Power Supply Side View of the Cisco Nexus 9336C-FX2 Switch
Cisco Nexus 9336C-FX2 NX-OS Mode Switch Hardware Installation Guide
2
Overview
Overview
To Next Page
Loading...
