Switch and Module Weights and Quantities
QuantityWeight per UnitComponent
124.3 lb (11.0 kg)Cisco Nexus 9336PQ Chassis (N9K-C9336PQ)
2
—
2.4 lb (1.1 kg)
2.4 lb (1.1 kg)
Fan Module
– Port-side intake (burgundy) (N9K-C9300-FAN3)
– Port-side exhaust (blue) (N9K-C9300-FAN3-B)
2 (1 for
operations
and 1 for
redundancy)
—
2.4 lb (1.1 kg)
2.64 lb (1.2 kg)
2.64 lb (1.2 kg)
2.64 lb (1.2 kg)
2.64 lb (1.2 kg)
2.39 lb (1.1 kg)
2.38 lb (1.08 kg)
Power Supply module
– 1200-W HVAC/HVDC dual-direction (white) (N9K-PUV-1200W)
– 1200-W (NEBS) AC port-side intake (burgundy) (NXA-PAC-1200W-PI)
– 1200-W (NEBS) AC port-side exhaust (blue) (NXA-PAC-1200W-PE)
– 1200-W AC port-side intake (burgundy) (N9K-PAC-1200W)
– 1200-W AC port-side exhaust (blue) (N9K-PAC-1200W-B)
– 930-W DC port-side intake (green) (UCSC-PSU-930WDC)
– 930-W DC port-side exhaust (gray) (UCS-PSU-6332-DC)
Power Input Requirements
The following table lists the typical amount of power consumed by the switch, and it lists the maximum
amount of power that you must provision from the power source as input to the power supply and switch for
peak conditions.
Table 2: Switch Power Input Requirements
Maximum Power
Consumption
Typical Power Consumption
660 W400 WCisco Nexus 9336PQ
Transceivers, Connectors, and Cables
Transceiver and Cable Specifications
To determine which transceivers and cables are supported by this switch, see http://www.cisco.com/c/en/us/
support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Cisco Nexus 9336PQ ACI-Mode Switch Hardware Installation Guide
46
System Specifications
Switch and Module Weights and Quantities
To Next Page
Loading...
