APPENDIX A
Rack Specifications
•
Overview of Racks, page 43
•
General Requirements for Cabinets and Racks, page 43
•
Requirements Specific to Standard Open Racks, page 44
•
Requirements Specific to Perforated Cabinets, page 44
•
Cable Management Guidelines, page 44
Overview of Racks
You can install the switch in the following types of cabinets and racks, assuming an external ambient air
temperature range of 0 to 104°F (0 to 40°C):
•
Standard perforated cabinets
•
Solid-walled cabinets with a roof fan tray (bottom to top cooling)
•
Standard open racks
If you are selecting an enclosed cabinet, we recommend one of the thermally validated types, either standard
perforated or solid-walled with a fan tray.
Note
We do not recommend that you use racks that have obstructions (such as power strips), because the
obstructions could impair access to field-replaceable units (FRUs).
Note
General Requirements for Cabinets and Racks
The cabinet or rack must also meet the following requirements:
Cisco Nexus 9336PQ ACI-Mode Switch Hardware Installation Guide
43
To Next Page
Loading...
