APPENDIX C
LEDs
•
Switch Chassis LEDs, page 51
•
Fan Module LEDs, page 52
•
Power Supply LEDs, page 52
Switch Chassis LEDs
The BCN, STS, and ENV LEDs are located on the left side of the front of the switch. The port LEDs are
appear as triangles pointing up or down to the nearest port.
StatusColorLED
The operator has activated this LED to identify this module in the chassis.Flashing blueBCN
This module is not being identified.Off
The switch is operational.GreenSTS
The switch is booting up.Flashing amber
Temperature exceeds major alarm threshold.Flashing red
The switch is not receiving power.Off
Fans and power supply modules are operational.GreenENV
At least one fan or power supply module is not operating.Amber
Port is connected with a transceiver or other connector.Green(port)
Port is not connected.Amber
Cisco Nexus 9336PQ ACI-Mode Switch Hardware Installation Guide
51
To Next Page
Loading...
