Cisco Nexus 9336PQ - Page 58

Cord Set DescriptionPower Cord Part NumberLocale
Cabinet jumper power cord, 250 VAC, 10 A, C14-C13
connectors, 2.3 feet (0.7 m)
CAB-C13-CBN
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-ARArgentina
250 VAC, 10 A, 3112 plug, 8.2 feet (2.5 m)CAB-9K10A-AUAustralia
250 V, 10 A, 6.9 feet (2.1 m)CAB-250V-10A-BRBrazil
250 VAC, 10 A, CEE 7/7 plug, 8.2 feet (2.5 m)CAB-9K10A-EUEuropean Union
10 A, 8.2 feet (2.5 m)CAB-IND-10AIndia
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-ISIsrael
250 VAC, 10 A, CEI 23-16/VII plug, 8.2 feet (2.5 m)CAB-9K10A-ITItaly
125 VAC, 13 A, NEMA 5-15 plug, 8.2 feet (2.5 m)CAB-9K12A-NANorth America
NEMA L6-20-C13, 6.6 feet (2.0 m)CAB-AC-L620-C13North America
200/240V, 6A, 8.2 feet (2.5 m)CAB-N5K6A-NANorth America
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-CNPeoples Republic of China
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-IDSouth Africa
250 VAC, 10 A, MP232 plug, 8.2 feet (2.5 m)CAB-9K10A-SWSwitzerland
250 VAC, 10 A, BS1363 plug (13 A fuse), 8.2 (2.5 m)CAB-9K10A-UKUnited Kingdom
Table 4: Power Cable Specifications for DC Power Supplies
Cord Set DescriptionPower CordPower Supply
8 AWG insulated cable (10 AWG minimum) for each
power supply
(customer supplied)UCSC-PSU-930WDC
(port-side intake airflow)
8-AWG cable with 3-pin keyed power supply connector
and three wires (power source connection)
CAB-48DC-40A-8AWGUCS-PSU-6332-DC
(port-side exhaust airflow)
Table 5: Power Cable Specifications for HVAC/HVDC Power Supplies
Cord Set DescriptionPower Cord Part NumberPower Type
2-foot (0.6 m) cable with Saf-D-Grid and SD connectorsCAB-HVAC-SD-0.6MHVAC
Cisco Nexus 9336PQ ACI-Mode Switch Hardware Installation Guide
48
System Specifications
Power Cord Specifications