Cisco Nexus 93400LD-H1 - Switch and Module Weights and Quantities; Switch Power Input Requirements; Transceiver and Cable Specifications

Switch and Module Weights and Quantities
QuantityWeight per UnitComponent
118.7 lb (8.48 kg)Cisco Nexus 93400LD-H1 Chassis (N9K-C93400LD-H1)
5—
0.277 lb (0.125 kg)
Fan Module
– Port-side exhaust (blue) (NXA-SFAN-35CFM-PE)
– Port-side intake (burgundy) (NXA-SFAN-35CFM-PI)
2 (1 for operations
and 1 for
redundancy)
—
2.5 lb (1.13 kg)
2.5 lb (1.13 kg)
2.73 lb (1.23 kg)
2.73 lb (1.23 kg)
2.73 lb (1.23 kg)
Power Supply module
– 1400-W AC port-side exhaust (blue) (NXA-PAC-1400W-PE)
– 1400-W AC port-side intake (burgundy) (NXA-PAC-1400W-PI)
– 2000-W HVAC/HVDC port-side intake (burgundy)
(N9K-PHV-2KW-PI)
– 2000-W DC port-side exhaust (blue) (NXA-PDC-2KW-PE)
– 2000-W DC port-side intake (burgundy) (NXA-PDC-2KW-PI)
Transceiver and Cable Specifications
To see the transceiver specifications and installation information, see https://www.cisco.com/c/en/us/support/
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Switch Power Input Requirements
The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Some power supplies have capabilities that are greater than the maximum power requirements for a switch.
To determine the power consumption characteristics for the switch, use the typical and maximum requirements
that are listed in the following table.
Note
Heat Dissipation
Requirement
Maximum Power
Consumption (AC or
DC)
Typical Power
Consumption (AC or DC)
Switch
2610.288 BTUs
per hour
765394 WCisco Nexus 93400LD-H1
Cisco Nexus 93400LD-H1 NX-OS Mode Switch Hardware Installation Guide
40
System Specifications
Switch and Module Weights and Quantities