Cisco Nexus 93400LD-H1 - Regulatory Standards Compliance Specifications

PhotoCord Set DescriptionPart Number
HVDC
6.6-foot (2.0 m) cable
with Saf-D-Grid and three
terminal connectors
300V AC / 400V DC
(+200/-200 V DC)
CAB-HVDC-3T-2M
Not applicableAll except Argentina,
Brazil, and Japan
No power cord included
with switch
NO-POWER-CORD
Table 1: HVAC/HVDC Power Cables Callout Table
Connect this end to the power supply unit.1
DC Power Cable Specifications
PhotoDescriptionPart Number
The 2000W DC poser
supply
(NXA-PDC-2KW-PE/PI)
is not shipped with a
connector. You must
purchase the cable
(PWR-2KW-DC-CBL)
separately.
NXA-PDC-2KW-PE/PI
Regulatory Standards Compliance Specifications
The following table lists the regulatory standards compliance for the switch.
Cisco Nexus 93400LD-H1 NX-OS Mode Switch Hardware Installation Guide
44
System Specifications
DC Power Cable Specifications