Cisco Nexus 93400LD-H1 - Power Cable Specifications

2000-W DC Power Supply Specifications
These specifications apply to the NXA-PDC-2KW power supplies.
SpecificationProperty
2000 WPower
Minimum to Maximum: -40 to -70 VDC
Nominal: -48 to -60 VDC
Input Voltage
-Frequency
90% or greater (20 to 100% load)Efficiency
Combined, n+1, and n+nRedundancy Modes
YesRoHS Compliance
YesHot Swappable
Power Cable Specifications
The following sections specify the power cables that you can order and use with this switch.
Power Cable Specifications for AC Power Supplies
Cord Set DescriptionPower Cord Part NumberPower Type
Power Cord Jumper, C13-C14 Connectors, 6.6 feet
(2.0 m)
CAB-C13-C14-2M
Cabinet jumper power cord, 250 VAC, 10 A, C14-C13
connectors, 2.3 feet (0.7 m)
CAB-C13-CBN
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-ARArgentina
250 VAC, 10 A, 3112 plug, 8.2 feet (2.5 m)CAB-9K10A-AUAustralia
250 V, 10 A, 6.9 feet (2.1 m)CAB-250V-10A-BRBrazil
250 VAC, 10 A, CEE 7/7 plug, 8.2 feet (2.5 m)CAB-9K10A-EUEuropean Union
10 A, 8.2 feet (2.5 m)CAB-IND-10AIndia
Power Cord Jumper, C13-C14 Connectors, 6.6 feet
(2.0 m)
CAB-C13-C14-2M-INIndia
Power Cord Jumper, C13-C14 Connectors, 9.8 feet
(3.0 m)
CAB-C13-C14-3M-INIndia
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-ISIsrael
Cisco Nexus 93400LD-H1 NX-OS Mode Switch Hardware Installation Guide
42
System Specifications
2000-W DC Power Supply Specifications