400-G QSFP-DD ports (4)250-GE ZSFP ports (48)1
LEDs (BCN, STS, ENV, SYNC, GPS, TIMING)3
To determine which transceivers, adapters, and cables are support this switch, see the Cisco Transceiver
Modules Compatibility Information document.
The following figure shows the switch features on the power supply side of the chassis.
DIN connector (10 MHz)2DIN connector (1 PPS)1
Time of Day (ToD) port4Power supply modules (1 or 2) (AC
power supplies shown) with slots
numbered 1 (left) and 2 (right)
3
Management port (SFP)6USB port5
Console port8Management port (RJ45)7
Fan modules (5) with slots
numbered 1 (left) to 5 (right)
9
The following figure shows the switch features on the side of the chassis.
Cisco Nexus 93400LD-H1 NX-OS Mode Switch Hardware Installation Guide
2
Overview
Overview