Cisco Nexus 9348GC-FXP - 1100-W AC Power Supply Specifications

• NXA-PDC-440W-PI
SpecificationCharacteristic
440 WMaximum output power
16 -8 AInput current
-36 to -72 VDCDC input voltage
-56 V@7.86 AOutput ratings
-36 VDC (minimum), -48 VDC (nominal), -72 VDC
(maximum)
Voltage range domestic
-36 VDC (minimum), -48 VDC (nominal), -72 VDC
(maximum)
Voltage range international
1841 BTUs per hour, 540 WTotal input BTU
1
1502 BTUs per hour, 440 WTotal output BTU
2
20 ABranch circuit protection
1
The total input and total output BTU ratings refer to input power to the power supply and output power
to the switch. The BTU ratings are based on -36 VDC.
2
The total input and total output BTU ratings refer to input power to the power supply and output power
to the switch. The BTU ratings are based on -36 VDC.
1100-W AC Power Supply Specifications
These specifications apply to the following power supplies:
• NXA-PAC-1100W-PE
• NXA-PAC-1100W-PI
SpecificationCharacteristic
Nominal range: 100 and 240 VAC (Range: 90-132
VAC, 180-264 VAC)
AC input voltage
Nominal range: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
12 A at 115 VAC
6 A at 240 VAC
Maximum AC input current
760 A at 100 VACMaximum input volt-amperes
1100 WMaximum output power per power supply
33 A (sub-cycle duration)Maximum inrush current
12 ms at 1100 WMaximum hold-up time
Cisco Nexus 9348GC-FXP ACI Mode Hardware Installation Guide
48
System Specifications
1100-W AC Power Supply Specifications