Power Specifications
Power specifications include the specifications for each type of power supply module.
1100-W AC Power Supply Specifications
These specifications apply to the following power supplies:
• NXA-PAC-1100W-PE2
• NXA-PAC-1100W-PI2
SpecificationCharacteristic
Nominal range: 100 and 240 VAC (Range: 90-132
VAC, 180-264 VAC)
AC input voltage
Nominal range: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
12 A at 115 VAC
6 A at 240 VAC
Maximum AC input current
760 A at 100 VACMaximum input volt-amperes
1100 WMaximum output power per power supply
33 A (sub-cycle duration)Maximum inrush current
12 ms at 1100 WMaximum hold-up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum
certified)
Efficiency rating
RSP1Form factor
1100-W HVAC/HVDC Power Supply Specifications
These specifications apply to the following power supplies:
• NXA-PHV-1100W-PE
• NXA-PHV-1100W-PI
SpecificationCharacteristic
94%Efficiency
100VAC – 277VAC, 240VDC – 380VDCInput voltage
Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide
45
System Specifications
Power Specifications