EasyManuals Logo

Cisco ONS 15454 Unpacking And Installing

Cisco ONS 15454
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
Unpacking and Installing the Cisco ONS 15454 Four-Shelf and Zero-Shelf Bay Assembly
78-13271-05
Safety Recommendations
Safety Recommendations
The following guidelines will help to ensure your safety and protect the equipment. This list does not
include every potentially hazardous situation.
Never attempt to lift an object that might be too heavy for you to lift by yourself.
Always disconnect the power source and unplug all power cables before installing or removing the
Bay Assembly.
Carefully examine your work area for possible hazards such as moist floors, ungrounded power
extension cables, and missing power grounds.
When using equipment such as a safety hand truck, pallet jack, or forklift to move the Bay Assembly
to another location, use only moving equipment that is capable of preventing the Bay Assembly from
tipping.
Do not wear loose clothing, jewelry (including rings and chains), or other items that could get caught
in the Bay Assembly.
Do not work alone if potentially hazardous conditions exist.
Recommended Materials
Because most of the installation is complete when you receive the system, the Bay Assembly requires
little installation material. The most significant tasks are removing the packaging from the Bay
Assembly and removing the Bay Assembly from the shipping pallet. Because the actual installation of
the Bay Assembly in each facility is done according to local site practice, your material needs may vary.
Cisco recommends that you have the following items on hand for installation:
A pallet jack to move the packaged Bay Assembly to the unpacking/staging area
A pair of scissors to cut the plastic banding on the shipping container
A safety hand truck with retractable safety leg wheels and a safety strap
Utility blankets or their equivalent to protect the Bay Assembly while on the hand truck
Phillips screw driver or cordless drill with Phillips bit
3/4 in. (19 mm) socket or box-end wrench for the earthquake floor bolts
Four optional kits listed in Table 2 on page 33 that can be ordered separately

Other manuals for Cisco ONS 15454

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ONS 15454 and is the answer not in the manual?

Cisco ONS 15454 Specifications

General IconGeneral
Form FactorRack-mountable
ManagementCisco Transport Controller (CTC), TL1, SNMP
ProtocolsSONET/SDH, Ethernet, OTN
Power SupplyRedundant AC or DC power supplies
Slots17
Supported InterfacesOC-3/STM-1 to OC-192/STM-64, 10/100/1000 Ethernet, 10G Ethernet
Storage Temperature-40°C to 70°C (-40°F to 158°F)
Humidity5% to 95% non-condensing
WeightApproximately 75 lb (34 kg)
Interfaces/PortsEthernet, SONET/SDH, Fibre Channel

Related product manuals