Cisco ONS 15454 - Fuse and Alarm Panel Wiring

23
Unpacking and Installing the Cisco ONS 15454 Four-Shelf and Zero-Shelf Bay Assembly
78-13271-05
Fuse and Alarm Panel Wiring
Figure 21 48 fibers from one node
Fuse and Alarm Panel Wiring
The FAP included in the four-shelf and zero-shelf bay assemblies has the capability to report eight
alarms to a network operations center (NOC). The ONS 15454 has the capability to report four
environmental alarms through the system. Only one shelf (with an AIC/AIC-I card) is needed to monitor
alarming for a loss of power and a blown fuse condition. The alarms are reported to the NOC through
the connected LAN wire also tied to the same shelf. Figure 22 shows the FAP and power.
62095