Cisco PenTeleData 8800 Series Administration Guide

DescriptionParameter
149 Video Receiver Packets Discarded: 0
For Cisco IP Phone 8845 and 8865
Video Max Jitter
0 Video Sender Resolution: 640 x 360
For Cisco IP Phone 8845 and 8865
Video Receiver Packets Lost
640 x 360 Video Sender Frames: 755
For Cisco IP Phone 8845 and 8865
Video Receiver Resolution
1 Video Sender iframes Req: 0
For Cisco IP Phone 8845 and 8865
Video Sender IDR Frames
747 Video Receiver IDR Frames: 0
For Cisco IP Phone 8845 and 8865
Video Receiver Frames
0 Video Sender Frame Rate: 16 fps
For Cisco IP Phone 8845 and 8865
Video Receiver iframes Req
16 fps Video Latency: 0 ms
For Cisco IP Phone 8845 and 8865
Video Receiver Frame Rate
232 Video Receiver Bandwidth: 226
For Cisco IP Phone 8845 and 8865
Video Sender Bandwidth
Paging Status
DescriptionParameter
Indicates Rx packets during a multicast paging.Multicast Rx Pkts
Indicates Tx packets during a multicast paging.Multicast Tx Pkts
TR-069 Status
DescriptionParameter
Indicates if TR-069 function is enabled or disabled.TR-069 Feature
Displays the inform time interval from CPE to ACS.Periodic Inform Time
Indicates the last inform time.Last Inform Time
Displays the success or the failure status.Last Transaction Status
Indicates the start and end time of the session.Last Session
Displays the key for reference checkpoint for
parameter set configured.
ParameterKey
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
254
Cisco IP Phone Troubleshooting
Paging Status

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English