Cisco RV134W Administration Guide

1
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide 5
Getting Started
Thank you for choosing the Cisco RV132W ADSL2+ Wireless-N router or the
Cisco RV134W VDSL2 Wireless-AC routers. This guide describes how to
physically install and manage your Cisco RV132W/RV134W router. The Getting
Started page displays the most common configurations on your device. Click the
links on the Web page to go to the relevant configuration page.
This page appears whenever you start the Device Manager. To change this
behavior, check Don’t show on start up.
Initial Settings
Change Default
Administrator Password
Displays the User Account page where you can
change the administrator password and set up a
guest account. See Configuring User Accounts.
Launch Setup Wizard Launches the Router Setup Wizard. Follow the on-
screen instructions.
Configure WAN Settings Opens the Internet Setup page to modify the WAN
parameters. See Configuring WAN Connections.
Configure LAN Settings Opens the LAN Configuration page to modify the
LAN parameters. For example, the management IP
address. See Configuring LAN Connections.
Configure Wireless
Settings
Open the Basic Settings page to manage the
wireless settings. See Basic Wireless Settings

Cisco RV134W Specifications

General

Brand	Cisco
Model	RV134W
Category	Wireless Router
Language	English