Cisco RV134W Administration Guide

Wireless Networks
Basic Wireless Settings
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide 73
4
Configuring Wireless Settings
Select Wireless > Basic Settings to configure basic wireless settings.
To configure basic wireless settings
Select Wireless > Basic Settings.
STEP 1 In the Radio field, check Enable to turn on the wireless radio. By default, there is
only one wireless network enabled, ciscosb1.
STEP 2 In the Wireless Network Mode field, select one of these options from the
drop-down list: (For the RV132W and RV134W 2.4G option.)
VLAN 1111
Wireless
Isolation
with SSID
Disabled Disabled Disabled Disabled
WMM Enabled Enabled Enabled Enabled
WPS Enabled for
2.4G but
Disabled by
default for 5G
Disabled Disabled Disabled
SSID
Name for
RV134W
ciscosb1_2.4
G or
ciscosb1_5G
ciscosb2_2.4
G or
ciscosb2_5G
ciscosb3_2.4
G or
ciscosb3_5G
ciscosb4_2.
4G or
ciscosb4_5G
B/G/N-Mixed If you have Wireless-N, Wireless-B, and Wireless-G
devices in your network. This is the default setting
for the RV132W & RV134 2.4G (recommended).
B Only Select this option if you have only Wireless-B
devices in your network.
G Only Select this option if you have only Wireless-G
devices in your network.
N Only Select this option if you have only Wireless-N
devices in your network.
B/G-Mixed Select this option if you have Wireless-B and
Wireless-G devices in your network.

Cisco RV134W Specifications

General

Brand	Cisco
Model	RV134W
Category	Wireless Router
Language	English