Cisco RV134W Administration Guide

Wireless Networks
Basic Wireless Settings
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide 78
4
STEP 7 In the Key Renewal field, enter the duration of time (600–7200 seconds) between
key renewals. The default value is 3600.
STEP 8 Click Save to save your settings. Click Back to go back to the Basic Settings
page.
Configuring WPA2-Enterprise and WPA2-Enterprise Mixed
The WPA2 Enterprise and WPA2 Enterprise Mixed security modes allow you to
use the RADIUS server authentication.
• WPA2-Enterprise—Allows you to use WPA2 to connect using the RADIUS
server authentication.
• WPA2-Enterprise Mixed—Allows WPA2 client to connect using the
RADIUS server authentication.
To configure the WPA2 Enterprise security mode:
STEP 1 In the Wireless Table (Wireless > Basic Settings), check the box for the network
you want to configure.
STEP 2 Click Edit Security Mode.
STEP 3 In the Select SSID field, select the SSID for which to configure the security
settings.
STEP 4 From the Security Mode menu, select one of the two WPA2 Enterprise options.
STEP 5 In the RADIUS Server field, enter the IP address of the RADIUS server.
STEP 6 In the RADIUS Port field, enter the port used to access the RADIUS server.
STEP 7 In the Shared Key field, enter an alphanumeric phrase.
STEP 8 In the Key Renewal field, enter the duration of time (600–7200 seconds) between
key renewals. The default value is 3600.
STEP 9 Click Save to save your settings.
STEP 10 Click Back to go back to the Basic Settings page.

Cisco RV134W Specifications

General

Brand	Cisco
Model	RV134W
Category	Wireless Router
Language	English